Want a pool fencing system that doesn’t look like its there? Go frameless! Our 12mm toughened glass gives your swimming area that classy look. Panels and gates are the required 1200mm high and various widths area available to make your planning easy!

All panels are “Grade A” standard and proudly display the Global Mark certified product mark meaning our glass panels have compliance with AS/NZS 2208:1996 – Safety Glazing Materials in Buildings.

Benefits of our glass system include,

  • Perfect polish and blemish free 5mm radius edges all around
  • All glass is processed from the same supplier meaning strict quality control
  • Tested and certified
  • Meets Australian Standards
  • Global Mark certified product
  • Highest Grade Stainless Steel
  • High End Gate Hardware

Start Planning

Start planning your fence by using the fence builder button below. This will tell you the size of the panel needed, how many spigots required and the panel spacing.

With the fence builder complete, email the component list to yourself or reference back to the open tab in your browser and compile a shopping list from the icons below.

(opens in new tab)

Once you have what you need, simply place your order and one of our sales team will be in touch regarding freight. Or collection can be arranged from our warehouses around Australia.

Select your glass panels here.

Select your glass hinge panels here.

Used to hang the gate if not attached to a wall or post

Select your gate panels here.

Select your gate hardware here.

Select your extras here.

Want DIY?

You can easily install your glass pool fence as a DIY project. All you need are a few tools.

Tools you will need:

  • Core drill, bit and base plate or hammer drill and masonry bit
  • Tape measure
  • Spirit level
  • String line / chalk line
  • Wood props or 2x Glassmate per panel
  • Hose and bucket
  • Mixing tool
  • Extension cord
  • Allen key

Using the Glassmate makes the project a lot easier but is not a necessity. The Glassmates will allow you to set multiple panels up at once. Simply set the jig, allow grout to set and remove. Two Glassmates will get you through the process.

Where to start?

  1. Measure out your required area and mark with chalk or similar.
  2. Use a string line to mark a straight line and mark out where spigots will be placed.
  3. Mark where holes are to be drilled.
  4. Drill holes.
  5. Placed Glassmates under the panel and set to correct height and make panes vertical.
  6. Fit spigots to glass.
  7. Mix grout mix and place into holes.
  8. Allow to set then continue to the next pane.

Need installation?

If the installation process is a little overwhelming, Call us for the install. We can come out for a measure, design, quote and install.

*Only available in the Adelaide metro area.

Pool Fencing Glass Systems

  • We provide the complete package from design to manufacture to deliver and install
  • Free measure & quote
  • Excellent customer service

Contact Us